Air flow sifter multi-layer vibrating screen carbon steel stainless steel vibrating screen

The airflow sieve, also known as the airflow sifter, is a device specifically designed

for high-precision sieving of fine powders. It abons the traditional principle of gravity

potential energy and uses high-speed airflow as the carrier, allowing powder

particles to be sprayed onto the screen with sufficient kinetic energy to achieve

classification.

Taking advantage of the small and light mass of powder particles, which are easy to

float and have good fluidity, they are fully dispersed into the, so that the powder no

longer agglomerates, but moves with the airflow one by one. After the material passes

through the spiral conveying system, it is mixed atomized with the airflow and enters

the cylinder, and the material is subjected to centrifugal force and cyclone thrust by

the wind wheel blades in the cylinder, thus the material to spray through the net. The

fine material that can pass through the net is discharged from the fine material

discharge port, and the oversized material that cannot through the net is discharged

from the coarse material discharge port along the cylinder wall, so as to achieve the

purpose of rapid screening.

1. High screening efficiency: The screening efficiency can reach more than 95%, the

output is 5-10 times or of the vibrating screen, which can greatly improve the

production efficiency.

2. High precision: The product fineness is precise, there is no over-size mixing

phenomenon, it can ensure that the particle size of the screened material meets the

requirements.

3. Good environmental performance: The fully enclosed structure, the screening

process is carried out under pressure semi-circulation, no dust overflow, low noise,

improves the working environment, and reduces the pollution of dust to the environment.

4. Long service life The screen is installed vertically, not loaded, and the scouring of the

cyclone can automatically clean the screen, which is not easy to block, and has a service

life.

5. Strong adaptability: It has a wide range of fineness, and powdery materials of

80-530 meshes can efficiently screened, and it can be used in parallel with various mills

and fans.

6. Simple operation and maintenance: The structure is simple, the installation is simple,

operation is convenient, and the maintenance is easy, which reduces the downtime of the

equipment and the maintenance cost.

Model	Screen cage size(mm) (diameter*length)	Screen material	Structure material	Mesh size	Power (kw)
EQLS-18065	180mm*650mm	Stainless steel or Nylon screen	Q235A	≤1000	2.2
			SUS304
EQLS-30010	300mm*1000mm		Q235A	≤1000	4
			SUS304
EQLS-50013	500mm*1300mm		Q235A	≤1000	5
			SUS304
Machine can be customized based on your need

 

 

1. Chemical industry: Used for the screening of light calcium powder, active calcium

powder, zinc oxide powder, graphite powder, manganese dioxide, sulfur powder,

alumina powder, magnesium oxide powder and other chemical raw materials.

 

2. Pharmaceutical industry: It can be used for the screening of traditional Chinese medicine,

western medicine intermediate powder, etc., to ensure that the particle size of the drug raw

materials meets the requirements and to ensure the quality of the drugs.

 

3. industry: It is suitable for the screening of food raw materials such as flour, milk powder,

sugar powder, starch, fruit and vegetable powder, hawthorn, etc., to improve the quality and

taste of food.

 

4. Paper industry: Used for the screening of fillers, pigments and other powdery materials in

papermaking, to improve the quality and performance of paper.

 

5. Metallurgical industry: It can be used for the screening of metal powders such as powder

and zinc powder, to meet the requirements of powder particle size in the metallurgical

production process.

 

6. Building materials industry: It is often used for the screening materials such as cement,

gypsum powder, quartz sand powder, perlite powder, etc., to ensure the quality of building

materials products.

 

 

 

 

 

 

 

Company Profile

We have been specializing in the production of Screening and conveying equipment for

13 years. China's vibrating screen industry top three. And we have done matching and

OEM for many large companies. Including the world's top vibrating screen manufacturer,

Sweco, USA, we have OEM for his China region. And our products are often exported to

Australia, Thailand, Indonesia, New Zealand and other countries.

We welcome customers or dealers to visit our factory and will arrange everything for you.
Our factory address: West of the industrial and commercial office of Da Zhaoying Town,
Xinxiang City, Henan Province.